Self-priming blasting machine
一、The QSY2215 rotary self-priming the sandblasting machine uses a high-pressure blast pot mixed abrasive and compressed air, mixed gas injects the chamber body to rotating workpiece that on the trolley, and cleaning the workpiece. While using the principle of pneumatic conveying, the air with dust and sand is sucked from the bottom of the chamber, and sent to the cyclone through the abrasive recovery system,he abrasive and dust separated, in order to achieve the abrasive to recycling. It is good cleaning effect, compact structure, low noise, less pollution cleanup equipment.
Technical parameters:
The main technical parameters
|
Workpiece weight(Kg)
|
500
|
Trolley diameter(mm)
|
φ1500
|
Sandblasting amount (m3/h)
|
20
|
Number of guns(Pcs)
|
1
|
Air compressor gas volume(m3/min)
|
7
|
Air compressor power(Kw)
|
45
|
Dust air volume (m3/h)
|
11000
|
Chamber body size(mm)
|
2000*1900*2000
|
二、QV60 type shot blasting machine is a car carrying the workpieces to shot peening chamber, workpiece is shot blasted by nozzle operated by person , sand and dust into the chamber through the hopper, pneumatic conveying sand material recovery, and sent to the sand and dust separator for automatic dust separation, the separated useful sand automatically falls in the sand tank, into the next cycle. As the product of honeycomb type sand suction floor using wind transport, there is no need to use a screw conveyor, belt conveyor, hoist transportation machinery, greatly saves the production cost, but also avoids the sand in the process of transportation equipment components wear, less pollution of the cleaning equipment.
Technical parameters:
The main technical parameters
|
Workpiece weight(Kg)
|
20000
|
Sandblasting amount (Kg/h)
|
1750-2000
|
Number of guns(Pcs)
|
2
|
Single gun consumption(m3/min)
|
6.1
|
Blast working pressure(Mpa)
|
0.6-0.8
|
Total power(Kw)
|
60
|
Dust air volume (m3/h)
|
23000
|
Chamber body size(mm)
|
12000*8000*3000
|